LP ECO Series 30 degree Solar Water Heater 300L with 30 degree aluminium stands
ADVANTAGE
1. Slope roof and flat roof avaliable.
2. Looks more beautiful.
3. Inlet and Outlet hole at the back of the tank,any angel of roof is suitable.
4. Electric heater on the tank cover(side)
FEATURE
Highly efficient absorber of high performance with daily average efficiency over 50%;
Start up quickly, heat pipe transfer the heat energy into the storage tank in one direction.
Withstand pressure of 6 Bar, can be connected directly with city water.
No water inside the evacuated tubes; the Solar Water Heater can still in service even with several tubes breakage;
Highly efficient insulation with polyurethane foam;
Simple structure, easy to assembly and install, diffuse flat plate reflector can be assembled easily with its module structure;
Can be used all year round in the cold climate;
Can be used together with Auxiliary electric boost;
Long service life, can be used as long as 10years.
Performance characteristics
- Higher energy yield and low heat loss due to the high vacuum of the evacuated tubes and PU insulation harmless to ozonosphere
- High-quality stainless steel in the inner tank to continuously maintain a good water quality.
Scope of delivery
-Tank
-Aluminum brackets
-Evacuated tubes
Installation types
- Flat roof, pitched roof
The thermosiphon solar water heater uses the sun to heat the working fluid (mostly water) in the Vacuum Tubes. The Solar Collector absorbs solar radiation, and converts the sunlight to heat and transfer it to the water. The heated water naturally rises through the solar collector into the water tank where the cooler water at the bottom of the tank is forced out and descends to the bottom of the collector (thermosiphon circulation). The circulation will be interrupted when there is no solar radiation.
Non-Pressurized Solar Water Heater is a cost-effective system for residential hot water application. this system is designed according to thermosiphon principle and operating with proportion difference between cold and hot water. The water heated by vacuum tubes is held in the stainless steel storage tank where the insulation preserves the heat.
Water heater capacity: 300L
Rated operating pressure: 0.06 Mpa
Gross surface area: 4.06m2
Aperture area: 2.7 m2
Dimensions (L x W x H):2510*1976*1312mm
Water tank dimensions: 450*2510mm
Tank package dimensions: 2580*550*490mm
Water tank Weight: 34kg
Inner tank Material: Stainless steel SUS304-2B
Inner tank Diameter / thickness: 350 / 0.4mm
Outer tank Material: White painted steel
Outer tank Diameter / thickness: 450 / 0.4 mm
Side cover Color: Blue
Insulation Material / thickness: Polyurethane / 50 mm
Tube Number 30 pcs
Tube Type: φ58 x 1800 mm three-target vacuum tube
Tube package dimensions: 1870 x 330 x 165 mm, 10 pcs in one carton.
Bracket Material: Aluminum alloy
Bracket Colour: Silver white
Bracket Inclination: 30 degree
Bracket Weight: 11 kg
Other optional parts: Electric heating provision hole, anode protection rod, etc.
Loading qty in 40HQ container: 60 sets
Contact Now
