High power output CPC Collector

• Model No.: CPC1518

Evacuated tube collectors- with and without CPC-reflector Application: Residential, service and industrial sector and for public buildings Hailstone test according to DIN EN 12975-2/TÜV test No. 435/142448 EC type examination: Z-IS-DDK-MUC-07-08-100029919-003 DIN CERTCO registration number: 011-7S1948R

CPC U Type collector

• Model No.: CPC1518

Number of evacuated tubes: 18 η0 in relation to aperture(EN 12975): 64.2% a1 with wind, in relation to aperture area: 0.89W/(m2k) a2 with wind, in relation to aperture area: 0.001W/(m2k2) Yield Forecast (location Würzburg, Germany, reference area 3 m2): 651kWh/m2a Yield Forecast (location Würzburg, Germany, reference...

Low Pressure Compact Solar Water Heater System

• Model No.: 22*300mm

Specialty 1. Economical type for most of area,common people can afford it 2. Simple product structure: solar collector and water tank connected together directly, no need of pipe to connect, and no pump to push fluid 3. Mature technology and stable operation 4. higher efficiency on photo thermal conversion. 5....

non-pressurized solar collector for large scale application

• Brand: Linuo Ritter International

• Packaging: manifold box and vacuum tubes are packed seperately in carton boxes

• Min. Order: 50 Set/Sets

• Model No.: 1850, 1860 non-pressurized solar collector

Non-pressurized vauum tube collector is an economic selection for hot water generation and process heating system. It has long operating life time but short pay-back period. Non-pressurized vacuum tube collectors are wildly used and installed for large scale hot water heating system, especially for hotel, appartment,...

Thermometer in 150L stainless steel solar heater

• Model No.: 150L

Application to have free hot water through solar radiation. Installation for inclined and flat roof Natural circulation of gravity Tank capacity: from 100L to 300L Inner tank: 0.5mm / SUS304-2B Outer tank: 0.4 mm / Painted steel Insulation: high density polyurethane foam Tubes: high vacuum borosilicate glass between...

Glass Evacuated Tube Collectors with CPC Reflector

• Brand: Linuo Paradigma

• Model No.: CPC-U 1512

For water and space heating. Scope of Delivery Fully pre-assembled unit comprising - evacuated tubes based on the thermos flask principle - manifold with direct flow heat conduction unit and dry tube connection Collectors are packed in individual boxes. In addition, there is a sun protection sheet over the evacuated...

Vacuum Tube Collectors with CPC Reflector

• Brand: Linuo Paradigma

• Model No.: CPC-U 1518

Series CPC1518 Number of evacuated tubes: 18 η0 in relation to aperture(EN 12975): 64.2% a1 with wind, in relation to aperture area: 0.89W/(m2k) a2 with wind, in relation to aperture area: 0.001W/(m2k2) Yield Forecast (location Würzburg, Germany, reference area 3 m2): 651kWh/m2a Yield Forecast (location Würzburg,...

Evacuated Tube Collectors with CPC Reflector Price

• Brand: Linuo Paradigma

• Model No.: CPC-U 1515

Fully pre-assembled unit comprising - 6, 9, 12, 15 or 18 evacuated tubes based on the thermos flask principle - manifold with direct flow heat conduction unit and dry tube connection - CPC-reflector Collectors are packed in individual boxes. In addition, there is a sun protection sheet over the evacuated tubes....

All-glass Evacuated Tube 47*1500mm

• Model No.: 47*1500mm

High performance evacuated tubes with selective coating Linuo Ritter International distributes highly efficient evacuated tubes. We offer high performance evacuated tubes with an improved geometry and performance. The evacuated tubes consists of two concentric glass tubes which are sealed in a semi-circular shape on...

solar hot water tank for renewable hot water

• Packaging: caron box

• Model No.: 200L

It connects with a tank accumulated high in the roof, the water falls by gravity to the solar system. It is fed to the automatic solar hot water tank. Saves estimated 75% energy consumption. It allows to work with a digital controller to show the temperature, the water level in the tank and to control the start and...

domestic pressurized flat panel solar heater

• Packaging: caron box

• Model No.: 150L

-Pressurized solar collector heater -Variable for inclined and flat roof -Internal tank: stainless steel SUS316L 1.2mm -External tank: painted steel / galvanized -Structure: galvanized -Diameter tank: 420-500mm -System capacity: 100L-300L -Specification of collector: flat, 2 ㎡ - Magnesium anode installed

high pressure heater with collector flat panel

• Model No.: 150L

solar collector: flat panel blue color Tank color: silver gray with black side cap Tank material: Tank interior-stainless steel SUS316L, outer tank: painted steel / galvanized Insulation layer: 40mm Base: galvanized, for flat roof and inclined roof Magnesium bar installed Custom brand Clean, free and comfortable hot...

Compact solar water heater 100L

• Brand: Linuo Ritter

• Packaging: carton box for FCL shipment, and plywood box is needed for LCL shipment

• Min. Order: 50 Set/Sets

• Model No.: LP-100L(30)

Solar water heater is also called solar geyser or solar thermosiphone system, it normally consists of three parts, water tank, vacuum tubes and brackets. Vacuum tubes are the main parts of a solar water heater, they absorb the sun light through the selective coating on the inner tubes, and transfer the heat to the...

U-pipe tube solar collector with reflector CPC

• Model No.: CPC1506-CPC1518

Empty glass tube: 6-21 units, tube diameter-47mm, tube length-1500mm Reflector: Aluminum made in Germany and in China Copper tube in glass tubes: Copper tube form U Certificate: Solar Keymark Advantages: High water temperature for industry or to produce steam. Application: Hotel, Hospital, Universities, ect

Thermal tank thermostat 150L stainless steel Water Heater

• Model No.: 150L

This pressurized system leaves hot water more comfortable than the gravity model due to the pressure from the inlet. The collector of high efficiency tubes convert as much as possible the solar radiation to heat energy because it is round with more surface of absorption and resvetment in internal tube- Between...

Thermal heater for solar pressurized with heat pipe

• Model No.: 200L

This solar system heats the water through transporting the heat converted by the coating into the evacuated tubes. Vacuum tube glass keeps the temperature better avoiding cakir loss in the longest possible time. The thicker aluminum base against corrosion and be strong. The insulation layer of polyurethane maintains...

Solar evacuated tube water heater

• Model No.: 150L

Allow direct connection to the pump or national water network for a comfortable hot water outlet There is no need to automatically control the cold water inlet through the network automatically, as it is an adjustable base that allows installation on a flat roof or sloping ceiling with the same base. Fuel tank...

Evacuated tube solar collector calculations

• Packaging: caron box

• Model No.: 150L

- Pressurized heat pipe solar water heater - Liner: Stainless steel SUS 304 2B thickness 1.2mm - Housing: painted / galvanized steel, thickness 0.4mm - Diameter tank: inner tank 420mm, - outer tank 500mm - System capacity: from 100L to 300L - Number of tubes: 10 to 30 units - Tube specifications: diameter and length...

Solar Water Heater System for Home

• Model No.: 30 tubos heat pipe

Size: 1970x2301x161mm Open area: 3.04 square meters Building area: 4.53 square meters Number of tubes: 30 units Tube size: 58x1800mm, 1.6mm espersor, borosilicate material Heat pipe: 30 units, copper material, R8 (14.24) X1700mm Weight: 99 kg Maximum function pressure: 8 bar Pipe joint: 75mm International Certificate:...

Collector Solar Heat Pipe 16 Tube

• Model No.: R58-1816

Solar Collector is a kind of solar collector, It used with heat preservation water tank, solar power workstation and the pipe. The solar collector is consisted of super conducting vacuum heat collecting tube and header, so it's of great efficiency of heat collecting. The absorbing percentage of the glass vacuum...

Solar Energy Collector Vacuum Tube Three-Target 58X1800

• Min. Order: 100 Bag/Bags

• Model No.: 47*1500mm

Three-target solar vacuum tube - Key component of solar collector and solar water heater - Coating material: Al-N/Al or SS-Al/N/Cu. Specification

Evacuated Tube Collectors with CPC Reflector

• Brand: Linuo Ritter International

For water, space and process heating and solar cooling. Scope of Delivery Fully pre-assembled unit comprising - 6, 9, 12, 15 or 18 evacuated tubes based on the thermos flask principle - manifold with direct flow heat conduction unit and dry tube connection - CPC-reflector Collectors are packed in individual boxes. In...

Non-pressurized solar water heater ECO SUS series

• Brand: Linuo Ritter International

• Packaging: carton box for FCL shipment, and plywood box is needed for LCL shipment

• Min. Order: 50 Set/Sets

• Model No.: LP ECO SUS Series 30 degree

LP ECO SUS Series 30 degree for domestic water heating, available with 100, 200 – 300L tank. Scope of delivery -Tank -Aluminum brackets -Evacuated tubes Installation types - Flat roof, pitched roof Advantages and benefits - Cost effective solar water heating solution - Long operating life time over 10 years - Low cost...

non-pressurized solar water heater

• Brand: Linuo Ritter

• Packaging: carton box for FCL shipment, and plywood box is needed for LCL shipment

• Min. Order: 50 Set/Sets

• Model No.: 100L, 150L, 200L, 250L, 300L

Thermosiphone solar water heater is an economical energy-saving products for household application. The solar water heater can be installed on the house roof and provide hot water to 2-8 persons in one day. 1. more than 18 years in the production of solar water heater. 2. European solar keymark certified. 3. Inner...