Flat plate collector water heater 300L

• Brand: Linuo Ritter International

• Packaging: carton box for FCL shipment, and plywood box is needed for LCL shipment

• Min. Order: 50 Set/Sets

• Model No.: FP SWH-Enamel tank

Flat plate solar water heater is a cost-effective system for residential hot water application. This system is designed according to thermosiphon principle and operating with proportion difference between cold and hot water. The water heated by flat plate collector is held on flexible stands and then transfered to the...

Solar water heater with enamel tank

• Brand: Linuo Ritter International

• Packaging: carton box for FCL shipment, and plywood box is needed for LCL shipment

• Min. Order: 50 Set/Sets

• Model No.: FP SWH-Enamel tank

Enamel tank flat plate solar water heater with 30 degree flexible stands, tank volume available from 150L to 300L. Scope of delivery -Enamel water storage tank -Flexible galvanized brackets for both pitched and flat roof -High effencient flat plate collectors Installation types - Flat roof, pitched roof Performance...

Digital controller for pressurized system

• Model No.: F807

Free Maintenance No glycol, simple structure. No annual and periodical check-ups or maintenance is necessary. Blind sleeve design, no pollution, no-leaking heat pipe, easy installation. No water in vacuum tubes, one broken tube will not affect the function of the whole system. High Performance With the cutting-edge...

Solar Water Heater controller

• Model No.: DJ07

Year-round Operation With the freezing-proof technology, the system is designed and installed to operate for all seasons. Electric heater is optional to use, to ensure plenty hot water in rainy days. Customer-friendly Vacuum tubes are directly connected to the tank, low heat loss. display the water temperature in the...

95mm thickness flat plate solar collector

• Brand: Linuo Ritter International

• Packaging: carton box for FCL shipment, and plywood box is needed for LCL shipment

• Min. Order: 50 Set/Sets

• Model No.: 2m2 flat plate solar collector, 3m2 flat plate solar collector

Flat plate solar collector with thickness up to 95mm, suitable for the cold areas. European Solar Keymark certified. With efficiency up to 80.5% under Solar Keymark testing standards. High annual energy yield, up to 1002kwh, under Wurzburg solar irradiation of 50℃ mdium temperature. 2m2 and 3m2 type are avaiable.

58*1500 and 58*1600 vacuum tube

• Model No.: 58*1500 vacuum tube, 58*1600 vacuum tube

Vacumm tube of different diameter, different length, such as 1500 or 1600mm. Vacuum tube of different thickness. For better hail-resistance performance, the 2.0mm/2.2mm thickness vacuum tubes are available for meeting different national standards. Meanwhile the vacuum tubes are with higher energy yield and lower heat...

high-temperature solar collector for steam pre-heating

• Packaging: caron box

• Model No.: CPC1512, CPC1518, XL1921

The high-temperature solar collector could heat the water up to 120℃. It could be usded for preheating of steam, solar cooling, solar district heating, etc. For the efficiency, it is higher than the regular collector by 3-4%, based on the vacuum tube's higher absorption rate and lower emission rate. With higher...

SUS201 solar water heater Vietnam

• Brand: Linuo Ritter International

• Packaging: caron box

• Supply Ability: 1000 sets per day

• Model No.: 100-300L

Stainless steel solar water heater are wildly installed in Vietnam. We are experience supplier of high quality solar water heater for Vietnam market. The solar system is used to heat water for 3 or 4 showers of a family. It has three main parts: Accumulation tank, aluminum structure, vacuum tube collector high...

All-glass Evacuated Tube 58-2100mm India

• Brand: Linuo Ritter International

• Packaging: standard package of 10 pcs/carton, customized package is avaliable on request

• Supply Ability: 10000 pcs per day

• Min. Order: 6300 Piece/Pieces

• Model No.: 58-2100mm

1. Three-target solar vacuum tube - Key component of solar collector and solar water heater - Coating material: Al-N/Al or SS-Al/N/Cu. We have our own production factory for vacuum tubes with production capacity of 5 million pieces of tubes annually. All our testing and inspection standard is higher than Chinese...

Vacuum tube solar water heater Vietnam

• Brand: Linuo Ritter International

• Supply Ability: 1000 sets per day

• Model No.: LP ECO Series 30 degree

The vacuum tubes absorb sun rays, and convert it to heat and heat the water inside of the tube. Then hot water in tubes rise through the tubes to the top of the tank, while cold water from the bottom of tank replaces it in the tube, to start the cycle again. This natural cycling of water driven by temperature...

Heat pipe vacuum tube solar water heater

• Model No.:  100L,150L,200L, 250L,300L

For domestic use this presurized system can offer stable hot water pressure and comfortable shower feeling. Because of pressure from water pipe, using this system will be more suitable for people who has strict requirment on jhot water pressure. Tank type can be stainless steel and also painted steel for diferent...

High temperature CPC Solar Collector

• Packaging: caron box

The vacuum tube collector with CPC (Compound Parabolic Concentrator) reflector has high energy yield due to special collector structufe that contains vacuum tubes with highly selective absorber layer, U shap copper pipes inside vacuum tubes for heat transport, aluminum heat transfer fin and highly reflecting CPC...

High temperature Solar Collector

• Packaging: caron box

The vacuum tube collector with CPC (Compound Parabolic Concentrator) reflector has high energy yield due to special collector structufe that contains vacuum tubes with highly selective absorber layer, U shap copper pipes inside vacuum tubes for heat transport, aluminum heat transfer fin and highly reflecting CPC...

the worldwide-top-5 flat plate solar collector factory

• Brand: Linuo Ritter International

• Packaging: Packed each set by carton

• Min. Order: 50 Set/Sets

• Model No.: 2m2 flat plate solar collector, 3m2 flat plate solar collector

Linuo Paradigma/Linuo Ritter International, as the top 5 manufacturer of flat plate solar collector in the world. please check the link, https://www.solarthermalworld.org/content/worlds-largest-flat-plate-collector-manufacturers-2018. European Solar Keymark certified high efficient flat plate solar collectors with...

Vacuum Glass tube 58-1800/58-2100mm

• Model No.: Vacuum tube 58-1800/58-2100mm

1. Total length of scuff on out tube should be less than 1/3 of length of tube. 2.Inner Tube Support Support be of the same color and installled in approrite possition 3. Absorption ≥91% 4. Emission ≤ 5.9% 5. Thickness =1.6mm 6. Weight : 2.3KG 7. Average Heat Loss Coefficient :U=0.51W/(m.℃) 8. Stagnation Coefficient:...

2.2mm/2.0mm thickness vacuum tube

For better hail-resistance performance, the 2.0mm/2.2mm thickness vacuum tubes are available for meeting different national standards. Meanwhile the vacuum tubes are with higher energy yield and lower heat loss, with life span even up to 25 years. 1. Absorption ≥92% or higher depending on the clients' requirements. 2....

All-glass evacuated tube 58-1800mm

• Unit Price: USD 1.9 / Piece/Pieces

• Brand: Linuo Ritter International

• Packaging: standard package of 10 pcs/carton, customized package is avaliable on request

• Supply Ability: 10000 pcs per day

• Min. Order: 7000 Piece/Pieces

• Model No.: 58-1800mm

1. Three-target solar vacuum tube - Key component of solar collector and solar water heater - Coating material: Al-N/Al or SS-Al/N/Cu. We have our own production factory for vacuum tubes with production capacity of 5 million pieces of tubes annually. All our testing and inspection standard is higher than Chinese...

Non-pressurized open loop solar collector

• Brand: Linuo Ritter International

• Model No.: LPC58-1850

Using professional test system including equipment imported from German to guarantee the quality of the whole solar system. Different specifications to meet the requirement of different building conditions. Easy installation, small area Environmentally friendly, small investment with huge payback. Flexible combination...

Non-pressurized solar collector for project

• Brand: Linuo Ritter International

• Model No.: LPC 58-1830

Natural circulation without pumps. More economic. Suitable for big project, more widely used in school, office, manufactory factory, breeding room, electroplating factory, fermenting factory, food factory and other hot-water-needed factory. The heat exchange efficiency of U pipe collector is better than that of heat...

Solar water heater 200L stainless steel water tank

• Brand: Linuo Ritter International

• Supply Ability: 1000 sets per day

• Model No.: LPE-SUS series

The vacuum tubes trap incident sun rays, and convert it to heat inside the inner tube. Water, now being heated its temperature rises, density changes, and hot water sections rise through the tube to the top of the tank, while cold water from the bottom of tank replaces it in the tube, to start the cycle again. This...

High efficiency water heater with solar

• Brand: Linuo Ritter International

• Supply Ability: 1000 sets per day

• Model No.: LP 200L

Thermosiphons - non-pressurized and pressurized Linuo Ritter International distributes thermosiphon systems manufactured by our internationally well-known manufacturing facility and top brand Linuo Paradigma, located in Jinan, China. The thermosiphon systems have been developed especially for solar water heating that...

solar thermal solar water heater

• Brand: Linuo Ritter International

• Supply Ability: 1000 sets per day

• Model No.: LP 100L

Thermosiphons - non-pressurized and pressurized Linuo Ritter International distributes thermosiphon systems manufactured by our internationally well-known manufacturing facility and top brand Linuo Paradigma, located in Jinan, China. The thermosiphon systems have been developed especially for solar water heating that...

solar collector with reflector

• Model No.: CPC-1518

Collector with U type cooper pipe for high temeprature application from 90-130℃ WIth reflector under tubes which can enhance around 15% efficiency Less heat loss due to the vacuumed tube use DIN CERTCO registration number: 011-7S1948R

Good quality vacuum tube

• Model No.: 58*1800

1. Total length of scuff on out tube should be less than 1/3 of length of tube. 2.Inner Tube Support Support be of the same color and installled in approrite possition 3. Absorption ≥91% 4. Emission ≤ 5.9% 5. Thickness =1.6mm 6. Weight : 2.3KG 7. Average Heat Loss Coefficient :U=0.51W/(m.℃) 8. Stagnation Coefficient:...