Product Categories
(Total 12 Products for Low Pressure Solar Collector Pipe)
Evacuated Tube Collectors with CPC
For water, space and process heating and solar cooling. Specification Series CPC1506 Number of evacuated tubes 6
solar hot water tank for renewable hot water
It connects with a tank accumulated high in the roof, the water falls by gravity to the solar system. It is fed to the automatic solar hot water tank. Saves estimated 75% energy consumption. It allows to work with a digital controller to show the temperature, the water level in the tank and to control the start and...
Split High Pressure Heat Pipe Solar Water Heater
for water heating, available with 150 and 300 l tank. Scope of delivery - Tank, - aluminum brackets, - heat pipe collector. Installation types - Pitched roof, flat roof. Advantages and benefits - Easy installation, low maintenance cost and elegant appearance. - The water tank can be matched with both flat type bracket...
Split High Pressure Heat Pipe Solar Heater
Features description: The split pressurized solar water heater composes of heat pipe solar collector, storage water tank, workstation system, related accessories and interconnecting pieces, etc. Workstation System: 1) An integrated system composes of intelligent controller, circulating pump, flow meter, relief valve,...
Heat pipe pressurized olar water heater
The selective coating on the inner cover of the vacuum tubes converts solar energy and transfers heat to the heat pipes by aluminum fins. The liquid in the heat pipe changes into vapor which rises to the condenser. Then the heat passes through the heat exchanger, the water inside of water tank is being heated, and the...
Heat pipe pressurized solar water heater 150L
Pressurized water tank ensures high comfort when customer uses hot water, the water flow and water pressure is much higher than compact non-pressurized solar water heater, customer will feel comfortable when he enjoys the hot water showering. The selective coating on the inner cover of the vacuum tubes converts solar...
Heat pipe pressurized solar water heater 200L
Scope of delivery -Tank -Brackets -Heat pipe evacuated tubes Installation types - Flat roof, pitched roof, min. inclination of 15 degree Series: HP420-100L Water tank capacity: 100L Rated operating pressure: 0.06 Mpa Gross surface area: 1.56m2 Aperture area: 1.21m2 Dimensions (L x W x H): 930x1875x1390mm Water tank...
Pressurized solar water heater with heat pipes 300L
Integrated pressurized solar water heater/solar water heater/solar heater/solar geyser/ vacuum tube solar water heater Features: 1) The vacuum tube adopts the three-layer cselective coating 2) It can withstand the pressure from tap water (0.6Mpa) 3) higher pressure-supportive capability 4) The best angle: A reasonable...
Heat pipe pressurized solar water heater
Evacuated heat pipe technology 1. Evacuated tubes based on the thermos flask principle and consisting of two concentric glass tubes and an evacuated gap to prevent heat loss. 2. Highly selective absorber layer on the inner glass tubes (AI/ALN,) which enables an optimum energy yield. 3. Aluminum heat transfer plate to...
12 vacuum glass tube solar collector
Diferent tube quantity from 12 units to 30 units satisfying diferent requirments. Installation in flat roof, inclined or on the wall System dimension: 1970x951x161 Gross area: 1.87 m2 Opening area: 1.22m2 Type heat pipe: R8 (14/24) * 1800 Collector efficiency: 74.5% Collector content: 0.638L Number of tubes: 12 units...
Evacuated Tube Collectors with CPC Reflector
For water, space and process heating and solar cooling. Scope of Delivery Fully pre-assembled unit comprising - 6, 9, 12, 15 or 18 evacuated tubes based on the thermos flask principle - manifold with direct flow heat conduction unit and dry tube connection - CPC-reflector Collectors are packed in individual boxes. In...
Pressurized Vacuum Tube Heat Pipe Solar Collector
Evacuated heat pipe technology 1. Evacuated tubes based on the thermos flask principle and consisting of two concentric glass tubes and an evacuated gap to prevent heat loss. 2. Highly selective absorber layer on the inner glass tubes (AI/ALN,) which enables an optimum energy yield. 3. Aluminium heat transfer plate to...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Send Inquiry
Mr. Guo
Email:
Send Inquiry Tel:86-531-88729112
Fax:86-531-88729223
Mobile Phone:+8618615206585
Email:
Address:No. 30766 East Jingshi Road, Jinan, Shandong
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
