Flat Plate Solar Thermal Collector is suitable for residential or commercial solar water heating projects. The titanium coated aluminium absorber sheet absorbs up to 95% of available sunlight converting into usable heat for hot water production. High efficient of 80.5% for 2 sqm of Flat Plate Collector with titanium absorber.
For water and space heating, can be used for hot water application below 65 degree C.
Scope of delivery
- Fully pre-assembled collector unit
Installation types
- Pitched roof, flat roof
Advantages and benefits
- Easy and low cost installation due to fully pre-assembled simple collector structure.
- Long operating life and stable performance.
Performance characteristics
- Large aperture area and high collecting efficiency.
- Full closed system adopts ion-free cycling medium to prevent scaling in the collector.
Glass
Toughened glass (glazing) protects the absorber from the outside environment while allowing through >90% of sunlight.
Absorber
A thin sheet of Aluminium is coated with a highly selective material that is extremely efficient at absorbing sunlight and converting it into usable heat. The aluminium sheet is ultrasonically welded to the copper riser pipes.
Insulation
The insulation helps reduce heat loss from the sides and back of the collector. Made from ultra-light weight polyster foam, this material is chosen to greatly reduce the weight of the collector.
Back Sheet
A galvanized sheet seals the back of the panel and adds to the rigidity of the collector.
Riser & Header Pipe
The header and riser pipes are brazed together to form a harp shaped heat exchanger that the solar system heat transfer fluid circulates through. The absorber sheet is ultrasonically welded to the riser pipes, thus transfers heat to the heat transfer fluid.
Aluminium Frame
high tensile 6063 aluminium alloy
| Series | FP2000 |
| Collector dimensions (L x H x D) | mm | 2000 x 1000 x 95 |
| Gross surface area | m2 | 2.00 |
| Aperture area | m2 | 1.84 |
| Absorber coating material |
| Blue Titanium |
| Absorber coating thickness | um | 0.3 |
| Absorber sheet material |
| Aluminum |
| Absorber sheet thickness | mm | 0.3mm |
| Absorption rate | % | ≥92 |
| Emission rate | % | ≤5.8 |
| Header tube | No. | 2 |
| Header tube | mm / material | φ22 x 0.6 / Copper |
| Riser tube | No. | 9 |
| Riser tube | mm / material | φ10 x 0.45 / Copper |
| Medium volume | L | 1.6 |
| Cover material |
| Low iron tempered textured glass |
| Cover thickness | mm | 3.2mm |
| Cover transmittance | % | ≥90 |
| Insulation material |
| Polyster |
| Insulation thickness | mm | 50mm |
| Frame material/ thickness | mm | Aluminum / ≥1.0mm |
| Back plate material/ thickness | mm | Galvanized aluminum sheet / 0.4mm |
| Test pressure | Mpa | 1.2 |
| Rated working pressure | Mpa | 0.8 |
| New weight | Kg | 36 |
| Collector effiency η0 | % | 0.805 |
| Max. stagnation temperature | °C | 216.9℃ |
| Heat loss coefficient a1 / k1 | W/(m2k) | 3.555 |
| Heat loss coefficient a2/ k2 | W/(m2k2) | 0.029 |
Contact Now
